WHAT IS PLOTSTART™?
It is a calcium based spray for use on food plots, crops, vegetables, trees and lawns. It is instantly soluble and available calcium. In addition it provides a unique mix of complex carbohydrates, amino acids and micronutrients not found in traditional fertilizers. It helps get your crop up and out of the ground quicker. Simply spray on at or prior to planting.
LIME EQUIVALENCY RATE: 2.5 GALLONS = 1 TON OF LIME
ADJUSTS SOIL HEALTH BIOLOGICALLY AND CHEMICALLY, FASTER THAN AG LIME
INCREASES PLANT GERMINATION
INCREASES NUTRIENT (NPK) AVAILABILITY FOR PLANTS
INCREASES CALCIUM FOR SEEDLINGS
HOW TO USE PLOTSTART™
STEP 1: HOW MUCH PLOTSTART?
2.5 Gallons of PlotStart™ = 1 Ton of Lime Per Acre. If your soil pH is 4.5-5.5 use 5 gallons of PlotStart™ per acre (equivalent to 2 tons of lime per acre). Use a max of 2 jugs (5 gallons PlotStart™ per acre) if the soil is acidic (4.5-5 pH) or spray 5 gallons of PlotStart™ per acre in the spring, then again in the fall for the fall planting totaling 10 gallons per acre over the course of 12 months.
STEP 2: MIX RATE
PlotStart™ must be mixed with water to evenly distribute it over the intended acreage. For most applications, 10-15 gallons of water is needed to apply PlotStart™ over a single acre. PlotStart™ is NOT applied in an oz/gallon of water ratio like herbicides, rather it is a per acre application. Simply mix enough water to evenly distribute the 2.5 gallons or 5 gallons (depending on pH) over the correct amount of acreage. PlotStart™ can be. Mixed directly with nitrogen solutions, and soil-applied herbicides. PlotStart™ CANNOT BE APPLIED WITH ROUND-UP® or GLYPHOSATE.
EXAMPLE: If you have a 25 gallon ATV sprayer, you will likely be able to evenly spray 2 acres. Fill the tank with 2.5 gallons per acre of PlotStart™ for soils 5.5 -7 in pH, or 5 gallons per acre for soils more acidic than 5.5. for a 2-acre food plot with a soil pH of 6.0, you would fill the tank with 2 x 2.5-gallon jugs (2.5 gallons per acre) then fill the rest of the tank up with water.
STEP 3: SPRAY
Once you have evenly distributed the correct amount of PlotStart™ per acre you are done! The effective formula of PlotStart™ will do the rest. It is suggested to follow up with PlotBoost™ after the food plot reaches full ground coverage (3-5 weeks) or when directly in the tank with your first round of post-emergent herbicide.
WHAT IS PLOTBOOST™?
PlotBoost™ is a spray for use on food plots, crops, vegetables, trees, and lawns. Developed by an American company that is a 30-year veteran of the agricultural industry, PlotBoost’s™ unique mix of complex carbohydrates, amino acids, and micronutrients NOT found in traditional fertilizers allow your plantings to reach their maximum potential. MADE IN THE U.S.A., PlotBoost™ affects both the plant and the immediate soil environment to maximize effectiveness.
Just spray when the plants are actively growing and PlotBoost™does the rest! Works for fall, spring, and summer plantings; all annuals and perennials.
PlotBoost™ will enhance your food plot and plantings by:
BOOSTS FOOD PLOT YIELD
REDUCES NEGATIVE HERBICIDE YIELD DRAGS
INCREASES PLANT’S ABILITY TO TAKE UP NUTRIENTS
INCREASES WATER UPDATE & DROUGHT TOLERANCE
INCREASES DISEASE AND INSECT TOLERANCE
CAN BE MIXED IN TANK DIRECTLY WITH HERBICIDES
CAN BE APPLIED 3X PER YEAR
HOW TO USE PLOTBOOST™
STEP 1: HOW MUCH PLOTBOOST™?
32 oz of PlotBoost™ Per acre can be applied to a food plot 3X per year. Typical application includes 3-5 weeks after germination or during the first post-emergent herbicide spraying.
PlotBoost™ species recommendations:
Spring plantings (Ex: clover, alfalfa, chicory) North – May to July (up to 3X); South – March to June (up to 3X)
Summer plantings (Ex: corn, soybeans, sorghum) North – May to August (up to 3X); South – April to August (up to 3X)
Fall plantings (Ex: wheat, brassica, turnips) North – August to November (up to 3X); South – September to December (up to 3X)
STEP 2: MIX RATE
PlotBoost™ must be mixed with water to evenly distribute it over the intended acreage. For most applications, 10-15 gallons of water is needed to apply PlotBoost™ over a single acre. PlotBoost™ is NOT applied in an oz/gallon of water ratio like herbicides, rather it is a per acre application. Simply mix enough water to evenly distribute the 32 oz over the correct amount of acreage. PlotBoost™ can be. mixed directly with Round-up® or Glyphosate, fungicides, insecticides, and other herbicides in the same spray tan, saving time!
EXAMPLE: If you have a 25 gallon ATV sprayer, you will likely be able to evenly spray 2 acres. Fill the tank with 32 oz gallons per acre of PlotBoost™ per acre then fill the rest of the tank up with water. For a 2 acre application, this would be 64 oz of PlotBoost™ and the rest of the tank filled with water.
STEP 3: SPRAY
Once you have evenly distributed the correct amount of PlotBoost™ per acre you are done! The effective it is suggested to follow up with PlotBoost™ again before summer droughts or before deer season to increase attraction and tolerances of the plot for a maximum of 3X per year.
WHAT IS PLOTTILL™?
PlotTill® works to offset compaction by improving soil structure, drainage and tilth to maximize yields and support overall soil and plant health. Specifically formulated for conventional tillage and no-till applications, PlotTill® helps support a healthy, growing environment so your crops can reach their potential. PlotTill® allows those planting food plots in heavy clay-based soils, or in areas with severe compaction to establish healthy food plots through manipulation of the soil structure itself, allowing air, water, and nutrients to flow easier between the soil and plants’ roots. The result is fast-growing, attractive, and vigorous food plots in conditions that previously would have been a challenge.
PlotTill® improves the tilth and aeration of the soil allowing more oxygen in for improved root development and enhanced soil microbial activity. PlotTill® should be used in conjunction with PlotStart® and PlotBoost®, to ensure maximum benefits.
Just spray at or before planting and PlotTill® does the rest! Works for fall, spring, and summer plantings; all annuals and perennials.
HOW TO USE PLOTTILL™
STEP 1: DETERMINE PROPER TIMING & FREQUENCY OF SPRAYING
Spring plantings (Ex: clover, alfalfa, chicory) North – May to July; South – March to June
Summer plantings (Ex: corn, soybeans, sorghum) North – May to August; South – April to August
Fall plantings (Ex: wheat, brassica, turnips) North – August to November; South – September to December
STEP 2: MIX RATE & OTHER CHEMICALS
Apply PlotTill™ at a rate of 8 oz (236.5 mL) per acre. It can be applied through standard aerial or ground spray equipment. Use 10-25 gallons of water per acre to obtain even coverage. PlotTill™ can be mixed with most fertilizer solutions and herbicides. (Always do a jar test to assure mixing compatibility.)
STEP 3: SPRAY & ACTIVATE
PlotTill™ requires 1 inch of rainfall or irrigation to activate and will continue working the entire growing season. You are done!